Overview
This aftermarket mini saw chain matches the factory specs for JawSaw, offering reliable performance at a lower cost. Replacing a stretched or damaged chain restores both cutting speed and operator safety.
Key specifications
- Bar length: 6”
Compatibility
This replacement chain works with JawSaw. Check your owner’s manual or the existing chain’s markings to verify pitch, gauge, and drive link count before ordering.
Installation notes
Remove the battery before servicing a pruning saw chain. Release the chain cover, lift off the old chain, and place the replacement into the bar groove with cutters facing forward on the top rail. Reattach the cover and tension the chain until snug with no visible sag. Test by pulling the chain around the bar by hand to verify smooth movement.
Common questions
Q: Will this 6” replacement chain fit my WORX JawSaw, or is it only for certain models?
This chain is made for JawSaw units that use a 6-inch bar, so it fits the compatible WORX JawSaw models designed around that bar length. If you’re unsure, check your saw’s bar length marking or your owner’s manual before installing, since standard chains for other saw types are not interchangeable with the JawSaw system.
Q: Do I need any special steps to install this 6” chain on a JawSaw?
Yes—make sure the saw is unplugged or the battery is removed first, then open the bar/chain cover and route the chain in the correct cutting direction around the 6-inch bar and drive sprocket. After reassembly, set the chain tension so it sits snugly on the bar but still moves freely by hand, and recheck tension after the first few cuts.
Q: How often should I replace or sharpen this 6” JawSaw chain, and what signs mean it’s worn out?
If the chain is cutting slowly, producing fine dust instead of chips, or pulling to one side, it likely needs sharpening or replacement. Replace it if the cutters are badly worn, the chain stretches beyond proper adjustment, or you see damaged drive links, because a worn chain can reduce cutting performance and strain the JawSaw’s bar and drive components.
