Overview
Sized for handheld mini chainsaws, this aftermarket chain fits BLACK+DECKER Alligator Lopper LLP120 and restores sharp cutting ability. Swapping in a new chain is the single most effective maintenance step to keep your saw performing at its best.
Key specifications
- Bar length: 6”
Compatibility
Fits BLACK+DECKER Alligator Lopper LLP120 as a direct replacement for the factory chain. Double-check your model number against the listing to ensure a correct match before installation.
Installation notes
Start by removing the battery or disconnecting the power cord. Pop off the sprocket cover, slide the old chain free, and thread the replacement onto the bar and drive sprocket. Keep the cutting teeth facing forward on the top of the bar. Set the tensioner until the chain has minimal sag, then do a quick hand rotation check before powering back up.
Common questions
Q: Will this 6 inch chainsaw chain fit my BLACK+DECKER Alligator Lopper LLP120?
Yes, this chain is made to fit the BLACK+DECKER Alligator Lopper LLP120 with the 6 inch bar. If your tool is the LLP120 and you are replacing the chain only, this is the correct size and application.
Q: Do I need any special steps to install this replacement chain on the LLP120?
Before installing, unplug the lopper and make sure the old chain and bar area are clean of sawdust and oil residue. When fitting the new 6 inch chain, verify the cutters are facing the correct cutting direction and confirm the chain tension is snug but still able to move freely around the bar.
Q: How often should I oil or maintain this 6 inch saw chain on the BLACK+DECKER Alligator Lopper?
Check the chain regularly for proper lubrication, tension, and any signs of dullness, especially after cutting dirty or sap-heavy wood. Keeping the chain clean and properly tensioned will help the LLP120 cut more smoothly and reduce extra wear on the bar and drive components.
