Overview
Engineered for overhead cutting, this replacement chain is sized specifically for Dewalt DCPS620B DCPS620M1 Chainsaw pole saw models. Ships as a 3-piece set, giving you a ready spare. Fresh chains cut cleaner, reduce vibration, and put less stress on the saw’s drive system.
Key specifications
- Bar length: 8”
- Quantity: 3 chains per pack
Compatibility
This chain is designed to fit Dewalt DCPS620B DCPS620M1 Chainsaw. Verify your specific model number and existing chain dimensions before purchasing.
Installation notes
Before installing, retract the pole saw to a manageable length and disconnect the power source. Loosen the bar-mounting nuts or knob, remove the side cover, and slide the old chain off the bar. Seat the new chain around the bar nose and into the guide groove, making sure the cutting teeth face forward on the top of the bar. Reinstall the cover and adjust tension until the chain is snug but can still be pulled around the bar by hand.
Common questions
Q: Will this 3PC 8 inch pole saw chain fit my Dewalt DCPS620B and DCPS620M1 pole saw?
Yes, this chain is made to fit the 8-inch bar used on the Dewalt DCPS620B and DCPS620M1 pole saw. As long as your saw is still using the original 8-inch setup, these replacement chains should install and run correctly.
Q: How do I know if the chain is installed correctly on my Dewalt 8-inch pole saw?
Make sure the cutting teeth on the top side of the bar are facing forward toward the tip of the bar, since a backward chain will not cut properly. After installation, adjust the tension so the chain sits snugly on the bar but can still be pulled around by hand with gloves.
Q: How often should I sharpen or replace the chain on this 8-inch Dewalt pole saw?
That depends on what you are cutting, but if the saw starts making fine dust instead of chips or you have to push harder than usual, the chain likely needs sharpening. Replace the chain if the cutters are badly worn, damaged, or if repeated sharpening no longer restores good cutting performance.
