Overview
Built for Black & Decker LCS1020 LCS1020B 20V Max Chainsaw chainsaws, this replacement chain delivers consistent cuts and reliable durability at a fraction of OEM cost. Packaged as a set of 3, giving you a ready spare. A worn chain strains the motor and increases kickback risk, so timely replacement keeps your saw running safely and efficiently.
Key specifications
- Bar length: 10”
- Pitch: 3/8”
- Gauge: .043”
- Quantity: 3 chains per pack
Compatibility
Engineered for direct compatibility with Black & Decker LCS1020 LCS1020B 20V Max Chainsaw. Always confirm your saw’s model number and bar length before ordering to ensure proper fit.
Installation notes
Disconnect the spark plug wire or remove the battery before changing a chainsaw chain. Remove the bar cover, release bar tension, and take off the old chain. Place the new chain into the bar groove with the cutting teeth facing forward on top. Reinstall the cover, adjust chain tension until snug, and test by pulling the chain around the bar by hand. Re-check tension after a few minutes of use.
Common questions
Q: Will this 10-inch 3/8 pitch chain fit my Black & Decker LCS1020B 20V Max chainsaw, or is it only for the LCS1020?
Yes, this chain set is made for both the Black & Decker LCS1020 and LCS1020B 20V Max chainsaws with a 10-inch bar. As long as your saw is using the original 10-inch setup, these replacement chains are the correct fit for those models.
Q: Do I need to adjust anything when installing one of these chains on my Black & Decker LCS1020?
After installing the chain, make sure the cutting teeth are facing forward on the top side of the bar and then set the chain tension so it sits snugly without binding. It’s a good idea to recheck tension after the first few minutes of cutting, since a new chain can stretch slightly as it breaks in.
Q: Are these chains good for general yard work like trimming branches and cutting small logs with the 10-inch Black & Decker saw?
Yes, these 10-inch chains are a practical match for the LCS1020/LCS1020B for normal homeowner cutting tasks such as pruning limbs, storm cleanup, and cutting smaller firewood pieces. Keep the chain sharp and the bar oil reservoir filled, and the saw will cut more smoothly with less strain on the motor.
