2PC 8 Inch Pruning Chainsaw Chain

§ Saw Chains · SKU B0GJSNP5ML

2PC 8 Inch Pruning Chainsaw Chain

$20 ★ 4.2

2PC 8 Inch Pruning Chainsaw Chain for Ryobi PSBCW01K, 8" Replacement Chain for Ryobi PSBCW01 / PSBCW01B / PSBCW01K Pruning Mini Chainsaw

Bar length8"
Pitch3/8 LP"
Gauge.043""
Drive links33DL
CategorySaw Chains
Part numberB0GJSNP5ML
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

This aftermarket pruning chain is engineered as a direct replacement for Ryobi PSBCW01K pruning saws. Available as a 2-pack, giving you a ready spare. Keeping a spare chain on hand means less downtime during jobs, and swapping a dull chain takes just minutes.

Key specifications

  • Bar length: 8”
  • Quantity: 2 chains per pack

Compatibility

Fits Ryobi PSBCW01K as a direct replacement for the factory chain. Cross-reference your saw’s model number with the product listing to confirm compatibility.

Installation notes

Always disconnect power before swapping the chain. On most pruning saws, a thumbscrew or tool-free knob releases the bar cover. Remove the worn chain, position the new one with teeth oriented in the cutting direction, and reassemble. Adjust tension so the chain is firm against the bar but still rotates freely by hand.

Common questions

Q: Will this 2-pack 8-inch pruning chainsaw chain fit my Ryobi PSBCW01K, or is it for a different bar size?

Yes, this chain is made for the Ryobi PSBCW01K with the 8-inch bar, so it’s the correct fit for that model and bar length. If your saw still has the original 8-inch setup, these replacement chains should install properly without changing the bar.

Q: I’m replacing the chain on my Ryobi PSBCW01K for the first time—do I need to do anything special when installing these 8-inch chains?

Make sure the cutting teeth are facing the correct direction on the top of the bar, then set the chain tension so it sits snugly but can still be pulled around the bar by hand with gloves on. After a few initial cuts, recheck the tension since a new chain can stretch slightly as it seats in.

Q: How should I maintain these 8-inch pruning chains so they last longer on my Ryobi PSBCW01K?

Keep the chain properly oiled during use and clean out sawdust from the bar groove and sprocket area regularly, especially after pruning green wood. It also helps to touch up the cutters with the correct file size before the chain gets very dull, because a lightly dulled chain is much easier to maintain than a heavily worn one.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

Ryobi PSBCW01K

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8 LP), gauge (.043"), and drive links (33DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 8".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides