Overview
Ships as a 2-piece set, this chain is a direct replacement for BAUER 19111C-B Chainsaw models. Replacing a stretched or damaged chain restores both cutting speed and operator safety.
Key specifications
- Bar length: 8”
- Quantity: 2 chains per pack
Compatibility
Manufactured to fit BAUER 19111C-B Chainsaw without modification. Always confirm your saw’s model number and bar length before ordering to ensure proper fit.
Installation notes
Start by powering down the pole saw and removing the battery or disconnecting the cord. Take off the side cover and bar, then remove the dull chain. When mounting the fresh chain, confirm the teeth point forward along the top edge of the bar. Tighten the tensioning screw until the chain sits firmly in the groove without binding, then hand-test rotation before powering on.
Common questions
Q: Will this 2PC 8 Inch Pole Saw Chain fit my BAUER 19111C-B pole saw, or is it only for standard handheld chainsaws?
Yes, this chain set is made to fit the BAUER 19111C-B with the 8-inch bar. It’s intended for that pole saw setup, so as long as your saw uses the original 8-inch bar, these chains should install correctly.
Q: How do I know when to tighten the 8 inch chain after installing it on my BAUER 19111C-B?
After installation, the chain should sit snugly on the bar but still pull around by hand without binding when the saw is off. A new chain will usually stretch a little during the first few uses, so check tension often and retighten if the chain begins to sag under the bar.
Q: Do both chains in this 2-pack need oiling and sharpening like the original chain on the BAUER 19111C-B?
Yes, these replacement chains need the same regular maintenance as the factory chain. Keep the chain properly lubricated, clean off sawdust buildup, and touch up the cutters with the correct file size to help maintain smooth cutting and reduce strain on the pole saw.
