2PC 8 Inch Pole Saw Chain

§ Saw Chains · SKU B0FCMHCRCF

2PC 8 Inch Pole Saw Chain

$18 ★ 4.7

2PC 8 Inch Pole Saw Chain for SKIL PS4563B-10 Chainsaw, 8" Replacement Chain for SKIL PS4563B-00

Bar length8"
Pitch3/8 LP"
Gauge.043""
Drive links33DL
CategorySaw Chains
Part numberB0FCMHCRCF
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

A purpose-built replacement chain for SKIL PS4563B-10 Chainsaw pole saws, designed to restore factory-level cutting performance. Packaged as a set of 2, giving you a ready spare. Running a dull chain forces the motor to work harder and shortens the life of your bar, making periodic replacement essential.

Key specifications

  • Bar length: 8”
  • Quantity: 2 chains per pack

Compatibility

This chain is designed to fit SKIL PS4563B-10 Chainsaw. Double-check your model number against the listing to ensure a correct match before installation.

Installation notes

Disconnect the battery or unplug the pole saw before beginning any chain work. Remove the bar cover, take off the spent chain, and lay the new one into the bar groove with teeth oriented in the correct cutting direction. After reattaching the cover, set the chain tension so there is slight play but no sag under the bar. Run the saw briefly and recheck tension after the chain seats itself.

Common questions

Q: Will this 2PC 8 Inch Pole Saw Chain fit my SKIL PS4563B-10 pole saw, or is it only for a standard handheld chainsaw?

Yes, this chain is made to fit the SKIL PS4563B-10 with the 8-inch bar. As long as your saw is using the original 8-inch setup, these replacement chains are the correct fit for that pole saw application.

Q: Do I need to replace the bar when installing one of these 8 inch chains on my SKIL PS4563B-10?

Not necessarily—if the bar on your SKIL PS4563B-10 is still straight, the groove is not excessively worn, and the tip turns freely, you can usually just replace the chain. It’s a good idea to inspect the bar for uneven wear and clean the groove before installing the new chain so it tracks properly.

Q: What’s the best way to tension and maintain this 8-inch pole saw chain after installation?

After installing the chain, adjust tension so it sits snugly against the 8-inch bar but can still be pulled around by hand with gloves on. Check tension again after the first few cuts, keep chain oil filled, and clean out sawdust buildup regularly to help the chain last longer and cut smoothly.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

SKIL PS4563B-10 Chainsaw

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8 LP), gauge (.043"), and drive links (33DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 8".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides