Overview
Comes in a convenient 2-pack, this chain is a direct replacement for Greenworks 20312/2030202 / 2019202 models. Running a dull chain forces the motor to work harder and shortens the life of your bar, making periodic replacement essential.
Key specifications
- Bar length: 16”
- Quantity: 2 chains per pack
Compatibility
This chain is designed to fit Greenworks 20312/2030202 / 2019202. Cross-reference your saw’s model number with the product listing to confirm compatibility.
Installation notes
Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.
Common questions
Q: Will this 2-pack of 16” chains fit my Greenworks 20312 and 2030202 chainsaw, or do I need a different length?
Yes, this chain is made for Greenworks 20312, 2030202, and 2019202 models that use a 16-inch bar. If your saw still has the original 16-inch setup, this is the correct replacement chain size for those units.
Q: Do I need to do anything special when installing one of these chains on my Greenworks 2019202?
Make sure the cutters are facing the correct direction on the top side of the bar, then tension the chain so it sits snugly but still pulls around by hand with gloves on. After a few minutes of cutting, recheck the tension since a new chain can stretch slightly during initial use.
Q: How often should I sharpen and maintain these 16” saw chains for the best performance?
Touch up the cutters whenever you notice slower cutting, extra pressure needed, or fine sawdust instead of larger chips. Keep the bar groove clean and make sure the chain is properly oiled, because good lubrication and correct tension will help both chains in the 2-pack last longer.
