Overview
Available as a 2-pack, this chain is a direct replacement for WORX WG309 models. Keeping a spare chain on hand means less downtime during jobs, and swapping a dull chain takes just minutes.
Key specifications
- Bar length: 10”
- Quantity: 2 chains per pack
Compatibility
This replacement chain works with WORX WG309. Cross-reference your saw’s model number with the product listing to confirm compatibility.
Installation notes
Disconnect the battery or unplug the pole saw before beginning any chain work. Remove the bar cover, take off the spent chain, and lay the new one into the bar groove with teeth oriented in the correct cutting direction. After reattaching the cover, set the chain tension so there is slight play but no sag under the bar. Run the saw briefly and recheck tension after the chain seats itself.
Common questions
Q: Will this 2-pack 10 inch pole saw chain fit my WORX WG309, or is it only for certain bar sizes?
Yes, this chain is made to fit the WORX WG309 when it’s using the 10-inch bar. The key match is the bar length and chain type, so if your WG309 still has the original 10-inch setup, this replacement should fit correctly.
Q: Do I need any special tools to install this 10 inch chain on my WORX WG309?
You usually only need the basic bar/chain adjustment tools that come with your pole saw or a standard wrench/screwdriver for tensioning. When installing, make sure the cutting teeth face the correct direction on the top of the bar, then tension the chain so it snaps back lightly but still moves freely by hand.
Q: How often should I sharpen or replace the chain on this 10 inch pole saw chain set?
That depends on how often you cut and whether you’re hitting clean wood or debris, but a chain should be sharpened when it starts making fine dust instead of chips or you have to force the saw through branches. Replace the chain if the cutters are heavily worn, the chain stretches excessively, or sharpening no longer restores good cutting performance.
