Overview
A replacement chain engineered to match the original specifications of Remington RM1015P RM1015SP RM1025P RM1025SPS RM1035P chainsaws. Sold as a 2-pack, giving you a ready spare. Chains wear down over time from regular use, and a fresh chain cuts faster and safer than a dull one.
Key specifications
- Bar length: 10”
- Quantity: 2 chains per pack
Compatibility
This chain is designed to fit Remington RM1015P RM1015SP RM1025P RM1025SPS RM1035P. Always confirm your saw’s model number and bar length before ordering to ensure proper fit.
Installation notes
Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.
Common questions
Q: Will this 2-pack 10 inch chain fit my Remington RM1025SPS, or is it only for the RM1015 series?
Yes, this chain is made to fit the Remington RM1025SPS as well as the RM1015P, RM1015SP, RM1025P, and RM1035P. As long as your saw uses a 10-inch bar and matches one of those listed models, these replacement chains are the correct fit.
Q: Do I need to do anything special when installing this chain on my Remington RM1035P?
Make sure the saw is unplugged first, then confirm the cutting teeth are facing forward on the top side of the bar before tightening everything down. After installation, set the chain tension so it sits snug on the bar but can still be pulled around by hand, and recheck tension after the first few minutes of use.
Q: How often should I sharpen or replace these 10 inch chains on an RM1015SP?
If the chain starts producing fine dust instead of chips, pulls to one side, or makes you press harder than usual, it likely needs sharpening. Keep the chain properly oiled and tensioned to extend its life, and replace it when the cutters are too worn to sharpen safely or the chain shows damage like cracked links or badly worn drive teeth.
