Overview
Designed as a drop-in replacement for DEWALT DCCS672 / DCCS672X1 / DCCS672B 60V Chainsaw models, this chain restores your saw’s cutting ability to like-new condition. Keeping a spare chain on hand means less downtime during jobs, and swapping a dull chain takes just minutes.
Key specifications
- Bar length: 18”
Compatibility
This chain is designed to fit DEWALT DCCS672 / DCCS672X1 / DCCS672B 60V Chainsaw. Double-check your model number against the listing to ensure a correct match before installation.
Installation notes
Begin by shutting off the saw and disconnecting the power source. Loosen the bar-mounting fasteners and remove the side cover to access the chain. Slide the worn chain off, seat the replacement around the sprocket and into the bar groove with cutters pointing in the direction of rotation. Tighten the tensioning screw until there is slight play but no droop, then secure the cover.
Common questions
Q: Will this 18 inch chainsaw chain fit my DEWALT DCCS672B 60V chainsaw, or is it only for the DCCS672X1 kit version?
Yes, this chain fits the DEWALT DCCS672, DCCS672B, and DCCS672X1 because those models use the same 18 inch bar setup. The “B” and “X1” just indicate different package versions of the same saw platform, so the chain fitment is the same.
Q: Do I need any special tools to install this replacement chain on my DEWALT DCCS672 18 inch saw?
You typically just need to loosen the side cover, remove the old chain, and seat the new chain correctly around the sprocket and 18 inch bar. Make sure the cutting teeth on the top of the bar face forward, then set the chain tension so it is snug but still pulls around by hand with gloves on.
Q: How often should I sharpen or adjust this 18 inch chain on the DCCS672, and what signs tell me it needs attention?
Check chain tension before each use, especially with a new chain, since it can stretch slightly during the first few cutting sessions. If the saw starts making fine dust instead of chips, pulls to one side, or you have to force it through wood, the chain likely needs sharpening and inspection for wear.
