2PC 16 Inch Chainsaw Chain

§ Saw Chains · SKU B0CXPVD3KG

2PC 16 Inch Chainsaw Chain

$22 ★ 4.5

2PC 16 Inch Chainsaw Chain for Craftsman CMECS600, 16" Replacement Chain for Craftsman S165 / S160 Chainsaw

Bar length16"
Pitch3/8 LP"
Gauge.050""
Drive links56DL
CategorySaw Chains
Part numberB0CXPVD3KG
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

Bundled as 2 chains, this chain is a direct replacement for Craftsman CMECS600 models. A worn chain strains the motor and increases kickback risk, so timely replacement keeps your saw running safely and efficiently.

Key specifications

  • Bar length: 16”
  • Quantity: 2 chains per pack

Compatibility

Engineered for direct compatibility with Craftsman CMECS600. Verify your specific model number and existing chain dimensions before purchasing.

Installation notes

Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.

Common questions

Q: Will this 2-pack 16 inch chainsaw chain fit my Craftsman CMECS600, or do I need to match anything besides the bar length?

Yes, this chain is intended for the Craftsman CMECS600 with a 16-inch bar. Besides matching the 16-inch bar length, it’s always smart to confirm your existing chain’s pitch, gauge, and drive link count against your saw or old chain before installing.

Q: Since this comes with 2 chains, can I swap them out on my Craftsman CMECS600 as they dull, and do they need sharpening before use?

Yes, rotating between the two chains is a good way to reduce downtime and keep your CMECS600 cutting consistently. They should be ready to install, but you’ll still want to check chain tension after mounting and keep each chain properly sharpened as it wears.

Q: What’s the best way to install and maintain this 16 inch replacement chain on a Craftsman CMECS600?

Make sure the saw is unplugged, then confirm the cutting teeth face forward on the top of the bar when installing the chain. After installation, set the tension so the chain sits snugly against the bar but can still be pulled by hand, and keep the bar groove and oiling area clean to help the chain last longer.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

Craftsman CMECS600

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8 LP), gauge (.050"), and drive links (56DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 16".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides