2PC 10 inch Chainsaw Chain

§ Saw Chains · SKU B0CDX7287L

2PC 10 inch Chainsaw Chain

$19 ★ 4.5

2PC 10 inch Chainsaw Chain for Worx WG323 WG323.9 Chainsaw, 10" Replacement Chain for Worx WG322 WG322.9 Chain Saw

Bar length10"
Pitch3/8 LP"
Gauge.043""
Drive links40DL
CategorySaw Chains
Part numberB0CDX7287L
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

Bundled as 2 chains, this chain is a direct replacement for Worx WG323 WG323.9 Chainsaw models. A worn chain strains the motor and increases kickback risk, so timely replacement keeps your saw running safely and efficiently.

Key specifications

  • Bar length: 10”
  • Quantity: 2 chains per pack

Compatibility

Fits Worx WG323 WG323.9 Chainsaw as a direct replacement for the factory chain. Check your owner’s manual or the existing chain’s markings to verify pitch, gauge, and drive link count before ordering.

Installation notes

Begin by shutting off the saw and disconnecting the power source. Loosen the bar-mounting fasteners and remove the side cover to access the chain. Slide the worn chain off, seat the replacement around the sprocket and into the bar groove with cutters pointing in the direction of rotation. Tighten the tensioning screw until there is slight play but no droop, then secure the cover.

Common questions

Q: Will this 10-inch chain fit my Worx WG323 and WG323.9 cordless chainsaw without any modification?

Yes, this chain is made for the Worx WG323 and WG323.9 using a 10-inch bar, so it should fit those models directly. Just make sure your saw still has the correct 10-inch bar installed and compare the old chain length and drive link setup before installation.

Q: Do these replacement chains come ready to install on the Worx WG323, and how tight should I set the chain?

They install the same way as the original chain, so if you’ve changed a WG323 chain before, the process should be straightforward. After mounting, adjust the tension so the chain sits snug against the bar but can still be pulled slightly by hand along the bar without binding.

Q: What kind of maintenance will help these 10-inch chains last longer on my Worx WG323.9?

Keep the chain properly tensioned, make sure the bar oil system is working, and clean sawdust from the bar groove and sprocket area regularly. It’s also a good idea to touch up the cutters with the correct file size when cutting performance starts to drop instead of waiting until the chain becomes very dull.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

Worx WG323 WG323.9 Chainsaw

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8 LP), gauge (.043"), and drive links (40DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 10".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides