2PC 16 Inch Chainsaw Chain

§ Saw Chains · SKU B0BJPDXBCF

2PC 16 Inch Chainsaw Chain

$22 ★ 4.5

2PC 16 Inch Chainsaw Chain for Husqvarna 135, 240, 120 Mark II, Replacement Chain for WEN 4017, 40417, 40417BT Chain Saw and More - 3/8" - .050" - 56 Drive L…

Bar length16"
Pitch3/8"
Gauge.050""
Drive links56DL
CategorySaw Chains
Part numberB0BJPDXBCF
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

Available as a 2-pack, this chain is a direct replacement for Husqvarna 135 models. A sharp chain means less effort, cleaner cuts, and safer operation compared to pushing through wood with worn teeth.

Key specifications

  • Bar length: 16”
  • Pitch: 3/8”
  • Gauge: .050”
  • Quantity: 2 chains per pack

Compatibility

This chain is designed to fit Husqvarna 135. Always confirm your saw’s model number and bar length before ordering to ensure proper fit.

Installation notes

Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.

Common questions

Q: Will this 2-pack 16 inch chain fit my Husqvarna 135, or do I need to match anything besides the bar length?

Yes, this chain is intended for a Husqvarna 135 with a 16 inch bar, but you should still confirm your saw uses a 3/8 pitch setup before installing. It’s also smart to compare the existing chain markings on your current bar or chain so the replacement matches your exact cutting setup.

Q: I have a Husqvarna 135 and I’m replacing the chain myself—do I need to do anything special when installing these 16 inch 3/8 chains?

Make sure the cutters are facing forward on the top side of the bar, then set the chain tension so it sits snugly but still pulls around by hand with gloves on. After the first few cuts, recheck tension because a new chain will usually stretch slightly as it seats in.

Q: How often should I sharpen and maintain these 16 inch saw chains on my Husqvarna 135?

Touch up the chain as soon as you notice it pulling to one side, making fine dust instead of chips, or requiring extra pressure to cut. Keep the chain properly tensioned and make sure your bar oil is flowing well, since a sharp chain with poor lubrication will still wear quickly.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

Husqvarna 135

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8), gauge (.050"), and drive links (56DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 16".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides