Overview
Purpose-built for Craftsman CMCCS320D1 pruning saws, this aftermarket chain restores cutting performance without the OEM price tag. Swapping in a new chain is the single most effective maintenance step to keep your saw performing at its best.
Key specifications
- Bar length: 6”
Compatibility
Manufactured to fit Craftsman CMCCS320D1 without modification. Double-check your model number against the listing to ensure a correct match before installation.
Installation notes
Start by removing the battery or disconnecting the power cord. Pop off the sprocket cover, slide the old chain free, and thread the replacement onto the bar and drive sprocket. Keep the cutting teeth facing forward on the top of the bar. Set the tensioner until the chain has minimal sag, then do a quick hand rotation check before powering back up.
Common questions
Q: Will this 6 inch pruning chainsaw chain fit my Craftsman CMCCS320D1, or do I need a different size?
Yes, this chain is made to fit the Craftsman CMCCS320D1 with the 6 inch bar. As long as your saw still has the original 6 inch bar setup, this is the correct replacement size for proper fit and cutting performance.
Q: How do I know if this chain is installed correctly on my CMCCS320D1?
Make sure the cutting teeth on the top of the bar are facing forward toward the bar tip, since installing it backward is a common issue. After mounting, adjust the chain so it sits snug against the bar but can still be pulled around by hand with gloves, then recheck tension after the first few cuts.
Q: Do I need to sharpen this 6 inch pruning chainsaw chain often, and what kind of maintenance helps it last longer?
A pruning chain like this should be touched up whenever you notice slower cutting, extra vibration, or fine sawdust instead of chips. Keeping the chain properly tensioned, maintaining bar oil flow, and avoiding contact with dirt or hidden branches will help extend chain life and keep the CMCCS320D1 cutting smoothly.
