Overview
Designed for compact pruning saws, this replacement chain fits 3004-20 Chainsaw models and delivers clean cuts on small branches. Bundled as 2 chains, giving you a ready spare. Chains wear down over time from regular use, and a fresh chain cuts faster and safer than a dull one.
Key specifications
- Bar length: 8”
- Quantity: 2 chains per pack
Compatibility
This chain is designed to fit 3004-20 Chainsaw. Double-check your model number against the listing to ensure a correct match before installation.
Installation notes
Always disconnect power before swapping the chain. On most pruning saws, a thumbscrew or tool-free knob releases the bar cover. Remove the worn chain, position the new one with teeth oriented in the cutting direction, and reassemble. Adjust tension so the chain is firm against the bar but still rotates freely by hand.
Common questions
Q: Will this 2PC 8” Pruning Saw Chain fit my Milwaukee 3004-20 chainsaw with the stock 8-inch bar?
Yes, this chain is made for the 3004-20 and matches the 8-inch bar setup used on that pruning saw. If your saw still has the original bar size, this is the correct replacement chain set.
Q: Do I need any special steps to install this 8” chain on the 3004-20, or is it a direct swap?
It installs as a direct replacement, but make sure the chain is seated correctly in the bar groove and around the drive sprocket before tightening the cover. After installation, set the chain tension so it sits snug on the bar but can still be pulled around by hand, then recheck tension after the first few cuts.
Q: How often should I sharpen or replace this pruning saw chain when using it for limb trimming?
For clean pruning, sharpen the chain as soon as you notice slower cutting, extra pressure needed, or fine sawdust instead of larger chips. Keep the chain properly oiled and tensioned, and replace it if the cutters are heavily worn, damaged, or no longer sharpen evenly.
