Overview
Ships as a 2-piece set, this chain is a direct replacement for RIDGID R01101K Chainsaw models. A sharp chain means less effort, cleaner cuts, and safer operation compared to pushing through wood with worn teeth.
Key specifications
- Bar length: 12”
- Quantity: 2 chains per pack
Compatibility
Manufactured to fit RIDGID R01101K Chainsaw without modification. Always confirm your saw’s model number and bar length before ordering to ensure proper fit.
Installation notes
Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.
Common questions
Q: Will this 2-pack 12 inch chainsaw chain fit my RIDGID R01101K, or do I need to match anything besides the bar length?
Yes, this chain is made to fit the RIDGID R01101K with a 12 inch bar. It’s still a good idea to confirm your saw is using the stock 12 inch setup and compare the old chain’s specs from the bar or owner’s manual before installation.
Q: Since this comes with 2 chains, can I swap them out on my RIDGID R01101K as they dull, and what’s the best way to maintain them?
Yes, rotating between the two chains is a smart way to reduce downtime and keep your cuts consistent. Keep both chains properly tensioned, sharpen them before they get overly dull, and check the bar groove and drive sprocket for wear each time you switch chains.
Q: How tight should I set this 12 inch chain when installing it on the RIDGID R01101K?
Set the chain so it sits snugly against the bar but can still be pulled around by hand with gloves on. After installation, run the saw briefly, shut it off, and recheck tension because a new chain can stretch slightly during its first few uses.
