2PC 12 Inch Chainsaw Chain

§ Saw Chains · SKU B0BMG2YF7S

2PC 12 Inch Chainsaw Chain

$17 ★ 4.6

2PC 12 Inch Chainsaw Chain for Greenworks 40V 20262 20292 Chainsaw, 12" Replacement Chain for Sun Joe SWJ698E 9A Chain Saw - 3/8" - .050" - 45 DL

Bar length12"
Pitch3/8"
Gauge.050""
Drive links45DL
CategorySaw Chains
Part numberB0BMG2YF7S
ConditionNew — aftermarket replacement

Fitment last verified:

Compare similar parts Check price & availability


Overview

Ships as a 2-piece set, this chain is a direct replacement for Greenworks 40V 20262 20292 Chainsaw models. A worn chain strains the motor and increases kickback risk, so timely replacement keeps your saw running safely and efficiently.

Key specifications

  • Bar length: 12”
  • Pitch: 3/8”
  • Gauge: .050”
  • Drive links: 45 drive links
  • Quantity: 2 chains per pack

Compatibility

This chain is designed to fit Greenworks 40V 20262 20292 Chainsaw. Verify your specific model number and existing chain dimensions before purchasing.

Installation notes

Power down the saw and disconnect the battery or spark plug lead. Remove the side cover and release bar tension. Take the old chain off the bar and sprocket, then thread the new chain into the bar groove, confirming the cutting edges face forward on the top rail. Set the tension so the chain pulls freely without sagging away from the bar, and do a brief test run to verify everything tracks correctly.

Common questions

Q: Will this 2-pack 12-inch chain fit my Greenworks 40V 20262, and is it also correct for the 20292 model?

Yes, this chain is made to fit Greenworks 40V models 20262 and 20292 that use a 12-inch bar and a 3/8 pitch chain. As long as your saw still has the original 12-inch setup, this is the correct replacement option for both models.

Q: Do I need to do anything special when installing this chain on my Greenworks 20292?

Make sure the cutting teeth on the top of the bar face forward before tightening the side cover. After installation, adjust the tension so the chain sits snugly against the bar but can still be pulled around by hand, then recheck tension after the first few cuts since new chains can stretch slightly.

Q: How should I maintain these 12-inch chains so they last longer on my Greenworks 40V chainsaw?

Keep the chain properly tensioned and make sure the bar oil reservoir is filled so the chain stays lubricated during use. It also helps to clean sawdust from the bar groove and sharpen the cutters when you notice slower cutting or the saw starting to throw fine dust instead of chips.

Compatibility

This part is verified to fit the following equipment. Always confirm the model number stamped on your machine before ordering.

Greenworks 40V 20262 20292 Chainsaw

Not sure which chain you need? See our guide: How to count drive links or Chain pitch, gauge & drive links explained.

Before you buy — how to verify fitment

  1. Find the bar stamp. Look on the side of your current guide bar for the pitch, gauge, and drive-link count.
  2. Match all three numbers. Pitch (3/8), gauge (.050"), and drive links (45DL) must all match.
  3. Check bar length. Measure cutting length from the tip to where the bar enters the saw body — this should match 12".
  4. Confirm your saw model against the compatibility list above. If your model isn't listed, the chain may still fit if pitch/gauge/DL match.

Frequently asked questions

How do I know this chain fits my saw?

Match three numbers: pitch, gauge, and drive-link count. All three must match the stamp on your current bar. If even one is off, the chain won't fit safely.

How do I measure pitch and gauge?

Pitch is the distance between any three consecutive rivets, divided by two. Gauge is the thickness of the drive links — measure with a caliper or check the bar stamp. Our guide covers both in detail.

How long does a replacement chain last?

With proper tension and occasional sharpening, an aftermarket chain lasts 3–5 cords of firewood or about 5 hours of active cutting — roughly the same as OEM.

Can I sharpen this chain or is it single-use?

Absolutely sharpen it. A quality replacement chain can be sharpened 3–5 times before the cutters are too short. Keep a round file matched to the cutter diameter.

Where to buy

This part is available through Amazon with free returns on most orders. We've verified the fitment listed above — check the live listing for current price, stock, and delivery options.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Saw Chains

§ Guides

Related how-to guides