§ Fitment Guide

McCulloch MAC4618 chain size & replacement chart

The McCulloch MAC4618 takes a .325" pitch, 1.3mm gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.

Fitment matrix

Bar lengthPitchGaugeDrive linksOregon chainsBars / combos
45cm .325" 1.3mm 20LGX072EQ20BP072E20BPX072E20LPX072E

Source: Oregon part-finder (EU), retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.

How to confirm the fit

  1. Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g. 3/8" LP .050".
  2. Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
  3. Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Measuring a chainsaw chain's gauge with a caliper

Watch: how to identify chain pitch and gauge

Oregon Products: Identifying Chain Pitch and Chain Gauge Oregon Products: Identifying Chain Pitch and Chain Gauge

Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.

Official McCulloch resources

FAQ

What size chain does a McCulloch MAC4618 take?

The McCulloch MAC4618 runs a .325" pitch, 1.3mm gauge chain. Available bar lengths: 45cm. Match the drive-link count to your bar (see the table above).

How do I know which gauge my MAC4618 chain is?

Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the MAC4618 are 1.3mm.

Can I put a longer bar on my McCulloch MAC4618?

Oregon lists 45cm bars for the MAC4618. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.