§ Fitment Guide
Einhell PKS45/1AV chain size & replacement chart
The Einhell PKS45/1AV takes a .325" pitch, .058" / 1.5mm gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 33cm | .325" | .058" / 1.5mm | — | Q21BP056E21BPX056E21LPX056E | 138PXBK095138PXLBK095138RNBK095138SLBK095543479 |
| 38cm | .325" | .058" / 1.5mm | — | 56445721LGX064EM21LPX064EQ21BP064E21BPX064E21LPX064E | 158PXBK095158PXLBK095158SLGK095158RNBK095158SLBK095158VXLGK095543486 |
| 40cm | .325" | .058" / 1.5mm | — | 21LGX066EQ21BP066E21BPX066E21LPX066E | 168PXBK095168PXLBK095168RNBK095168SLBK095 |
| 45cm | .325" or 3/8" | .058" / 1.5mm | — | 21LGX072EM21LPX072EQ21BP072E21BPX072E21LPX072E | 188PXBK095188SFGK095188PXLBK095188RNBK095188SLBK095188SLGK095188VXLGK095188ATMK095556429 |
Source: Oregon part-finder (EU), retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Einhell resources
- Einhell UK manuals & service — owner's manual for the PKS45/1AV, including tensioning and maintenance intervals.
- Einhell spare parts shop — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Einhell PKS45/1AV take?
The Einhell PKS45/1AV runs a .325" pitch, .058" / 1.5mm gauge chain. Available bar lengths: 33cm, 38cm, 40cm, 45cm. Match the drive-link count to your bar (see the table above).
How do I know which gauge my PKS45/1AV chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the PKS45/1AV are .058" / 1.5mm.
Can I put a longer bar on my Einhell PKS45/1AV?
Oregon lists 33cm, 38cm, 40cm, 45cm bars for the PKS45/1AV. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.